ANSI Cut Resistant Gloves Singapore: Complete Guide to ANSI Cut Levels (A1–A9)

When sourcing ANSI cut resistant gloves in Singapore for construction, marine fabrication, or manufacturing, you will most commonly encounter the European EN 388 standard. However, many international safety specs, oil and gas operators, and multinational contractors also specify ANSI cut levels (ANSI/ISEA 105). Understanding how the ANSI A1–A9 scale works—and how it compares to EN 388—helps safety officers and procurement teams select the right hand and arm protection without over-specifying or compromising worker dexterity.
What Are ANSI Cut Levels?
Developed by the American National Standards Institute (ANSI) and the International Safety Equipment Association (ISEA), ANSI/ISEA 105 is the North American standard for hand protection classification.
To rate ANSI cut resistant gloves, laboratories use a Tomodynamometer (TDM-100) machine. A straight razor blade is drawn across a 25 mm sample of the glove material under varying loads. The ANSI rating (from A1 to A9) is determined by the exact weight in grams required for the blade to slice through the fabric.
The ANSI/ISEA 105 Cut Resistance Chart (A1–A9)
ANSI Rating | Cut Force (Grams) | Hazard Level | Common Industrial Applications |
ANSI A1 | 200 – 499 g | Low / Nuisance | Warehousing, small parts assembly, general material handling, dry-walling |
ANSI A2 | 500 – 999 g | Low / Moderate | Packaging, HVAC installation, plastics handling, light metal assembly |
ANSI A3 | 1,000 – 1,499 g | Light / Medium | Automotive assembly, general construction, facility maintenance |
ANSI A4 | 1,500 – 2,199 g | Medium | Electrical work, carpentry, light glass handling, metal stamping |
ANSI A5 | 2,200 – 2,999 g | Medium / Heavy | Metal fabrication, sheet metal handling, carpet installation, food prep |
ANSI A6 | 3,000 – 3,999 g | High | Glass and window manufacturing, aerospace, changing sharp industrial blades |
ANSI A7 | 4,000 – 4,999 g | High / Extreme | Heavy metal stamping, sharp sheet metal handling, industrial blade work |
ANSI A8 | 5,000 – 5,999 g | Extreme | Heavy recycling sorting, sharp structural metal fabrication |
ANSI A9 | 6,000+ g | Extreme | Window manufacturing, heavy meat processing, direct contact with extreme sharp hazards |
Note: Under the ANSI/ISEA 105-2024 update, compliant gloves feature a standardized pentagon pictogram on the back of the hand displaying the Cut Rating (A1–A9) at the top center, alongside Abrasion (0–6) on the left and Puncture (0–5) on the right
ANSI Cut Resistant Gloves vs. EN 388: How Do They Compare?
In Singapore, government and infrastructure projects (such as LTA, PUB, and petrochemical tenders) typically specify EN 388:2016 ratings (Levels A to F). Because both EN 388:2016 and ANSI/ISEA 105 use the same TDM-100 testing method (ISO 13997), their scales align closely—with one key difference at the top end:
ANSI A1 to A6 roughly correspond to EN 388 Levels A to F.
ANSI A7, A8, and A9 go beyond EN 388 Level F (which caps out at 3,000+ grams / 30 Newtons), giving safety managers finer granularity for extreme cut hazards.
ANSI/ISEA 105 | EN 388:2016 (ISO 13997) | Force Required |
A1 | Level A | 200 g (2 N) |
A2 | Level B | 500 g (5 N) |
A3 | Level C | 1,000 g (10 N) |
A4 | Level D | 1,500 g (15 N) |
A5 | Level E | 2,200 g (22 N) |
A6 - A9 | Level F | 3,000 g+ (30 N+) |
Choosing the Right ANSI Cut Resistant Gloves in Singapore
Higher cut resistance isn't always better—a glove rated A9 is thicker and less flexible than an A4 or A5 glove, which can cause hand fatigue during precision tasks. Always match the rating to your specific workplace hazard:
Medium to Heavy Fabrication & Forearm Protection (ANSI A5): When handling sheet metal or sharp components where wrist and forearm exposure is a concern, pairing cut-resistant gloves with sleeves like the EZ Guard SKD 013-H5 Anti Cut Sleeve (ANSI A5 / EN 388 Level E) protects workers beyond the cuff.
High Cut Hazards & Heavy Construction (ANSI A6): For demanding industrial handling requiring touch-screen capability and reinforced durability, gloves such as the NXG NXC3158 Heavy Duty Premium (ANSI A6 / EN 388 4X43F) deliver top-tier EN 388 Level F protection without sacrificing dexterity.
Extreme Cut & Needle-Stick Environments (ANSI A9): For waste management, recycling sorting, or extreme blade hazards where maximum protection is non-negotiable, the EZ Guard DY1850NM/NR (ANSI A9 / EN 388 4X44F) combines the highest possible ANSI A9 cut rating with ANSI Level A5 needle-stick resistance.
Where to Buy ANSI Cut Resistant Gloves in Singapore
Plony Industries is a trusted industrial safety supplier maintaining ready stock of EN 388 and ANSI cut resistant gloves in Singapore. Whether you are outfitting a team for LTA, PUB, marine, or petrochemical projects, we provide full test certifications upon request.
👉 Explore our full range of Hand & Arm Protection or contact our team at cs@plonyindustries.com / 63665855 for bulk pricing and technical specification sheets.





Comments